Weidmuller IE-MC-VL Series Guide d'installation

Media Converter – Value Line IE-MC-VL Series Hardware Installation Guide Third Edition, June 2011 1243430000/02/06.11 Please note: This

data from device II to device I, for full-duplex transmission. All you need to remember is to connect the Tx (transmit) port of device I to the Rx (re

Dip Switch Setting IE-MC-VL Series DIP switch 123ON DIP Dip Switch 1 (Default: Off ) ON: Enables the PORT Alarm. If the port’s link fails, the re

- 12 -Blinking Data is being transmitted at 100 Mbps (TP) Off 100BaseTX Port’s link is inactive On FX port’s 100 Mbps is active Blinking Data is bein

- 13 -If the Media Converter’s RJ45 Ethernet port is connected to a non-negotiating device, then the default values 10 Mbps speed and half-duplex mod

- 14 -Ambient Relative Humidity 5 to 90% (non-condensing) Regulatory Approvals Safety UL60950, UL 508, CSA C22.2 No. 60950, EN60950 Hazardous Loc

- 2 -Overview Weidmüller Media Converter, which is specially designed for reliable and stable operation in harsh industrial environments, provides in

Panel Layout of IE-MC-VL Series 1. Grounding screw 2. Terminal block for power input PWR1/PWR2 and relay output 3. Heat dissipation orifices 4. Dip

- 4 -Mounting Dimensions DIN-Rail Mounting The aluminum DIN-Rail attachment plate should be fixed to the back panel of Weidmüller Media Converter w

metalspringDIN-Rail metalspringDIN-Rail To remove the Media Converter from the DIN-Rail, simply reverse Steps 1 and 2 above. Wall Mounting (Optional

II 3G ATEX Information 1. Certification number DEMKO 11 ATEX1106692x 2. Ambient range (-40°C ≤ Tamb ≤ 75°C) 3. Certification string (Ex nC nL IIC

WARNING This equipment has been evaluated as EEx nC IIC T4 equipment under DEMKO Certificate No. 03 ATEX 0324537U. Each module is marked with II 3G

ATTENTION This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. Wiring the Alarm Contact The Alarm Cont

ATTENTION Before connecting the device to the DC power inputs, make sure the DC power source voltage is stable. Communication Connections IE-MC-VL m