Weidmuller WAVE Analog DC Alarm Manuel d'utilisateur télécharger pdf (Page 5)

Selecting the operating mode

SW 1

Function 1 2 3 4

Channel A High Trip 1

Channel A Low Trip 0

Channel B High Trip 1

Channel B Low Trip 0

FAILSAFE, Channel 1& 2 0 0

NON FAILSAFE, Channel 1& 2

NON FAILSAFE: The relay picks up when the alarm is triggered.

The relay drops out when the alarm is triggered.

FAILSAFE: An alarm is also triggered in the FAILSAFE mode,

if, for example, the operating voltage to the

module fails.

Low trip: Alarm is triggered if the signal undershoots the

threshold.

High trip: Alarm is triggered if the signal overshoots the

threshold.

Signal threshold: Adjustments of the signal threshold (1...90 )% are

made for channel 1 with the potentiometer P1,

and separately for channel 2 via potentiometer P2.

Hysteresis: Adjustments of the hysteresis (1...90 )% are made

for channel 1 with the potentiometer P3, and

separately for channel 2 via potentiometer P4.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Weidmuller WAVE Analog DC Alarm Manuel d'utilisateur Page 5