Weidmuller WI-MOD-E-G Manuel d'utilisateur télécharger pdf (Page 56)

WI-MOD-9-E Wireless Ethernet User Manual

WI-MOD-9-E Manual V1.9 Page 56

Alternate procedure – Adjust WI-MOD-9-E network settings using serial

port(assuming configuration PC is on existing network)

a) Open terminal program with settings with data rate 19200bps, 8 data bits,

1 stop bit and no parity.

b) Set dipswitch to SETUP

c) Connect straight through serial cable to WI-MOD-9-E and power up unit.

d) When prompted, strike the Enter key to abort automatic boot

e) Set IP address of WI-MOD-9-E to 192.168.0.200 with command bip

192.168.0.200

f) Set netmask of WI-MOD-9-E to 192.168.0.200 with command bnm

255.255.255.0

g) Set gateway address of WI-MOD-9-E to 192.168.0.1 with command /jointfilesconvert/434229/bgw

192.168.0.1

h) Set dipswitch to RUN

i) Reset WI-MOD-9-E with reset command.

j) Open configuration webpage with Internet Explorer at address

http://192.168.0.200/

When prompted for password, enter default username “user” and password

“user”

Enter “Quick Start”, and select Access Point.

IP address should be 192.168.0.200

Enter a System Generator String

Select the Radio Encryption required.

Save the changes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Pas de commentaire

Weidmuller WI-MOD-E-G Manuel d'utilisateur Page 56