Weidmuller UCVAR - Universal glavanically isolated signal con Manuel d'utilisateur télécharger pdf (Page 22)

Output calibration procedure

When the

display shows

Action/Description

ì Å

ENT

Put the instrument in setup mode and scroll through the main menu

COPn

Press Å or ì

COPy

Calibrate Outputs? Toggle Start

Measure the output current

I=0

The output current should be 0.00 mA

(Use the keypad to adjust the value as required)

Increase Decrease Accept

I=20

The output current should be 20.00 mA Increase Decrease Accept

Measure the output voltage

E=0

The output voltage should be 0.00 V Increase Decrease Accept

E=10

The output voltage should be 10.00 V Increase Decrease Accept

Save

Instrument will save values and return to normal operation (using the new values).

Note: Do not remove the power while the save message is on display.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Weidmuller UCVAR - Universal glavanically isolated signal con Manuel d'utilisateur Page 22